ISSN : 1229-6783(Print)
ISSN : 2288-1484(Online)
ISSN : 2288-1484(Online)
Journal of the Korea Safety Management & Science Vol.15 No.2 pp.21-30
DOI : https://doi.org/10.12812/ksms.2013.15.2.21
DOI : https://doi.org/10.12812/ksms.2013.15.2.21
제조업 사업장의 산업안전보건경영체계와 규제 순응도
Occupational safety and health management system and regulation compliance in manufacturing enterprises
Received April 20, 2013; Revision Received June 11, 2013; Accepted June 5, 2013.
Abstract
OSHMS(Occupational Safety and Health Management System) is able to define as a typical convergence ofall kinds of activities and elements that support maintaining safety at workplace and protecting employee’shealth. In particular, fundamental function of OSHMS is preventing diverse hazards at workplace through highlevel of regulation compliance. Furthermore, insuring safety in workplace, protecting employee’s health andincreasing effectiveness in manufacture are OSHMS’s additional functions. Based on the division of manufacturein 2009 Survey on Current Status of Occupational Health & Safety data, the study analyses certain relationbetween OSHMS and level of regulation compliance. The main finding is that most activities and elementswhich formed by OSHMS are being affected by regulation clauses.
Occupational safety and health management system,Regulation compliance,Manufacturing enterprises,Survey on Current Status of Occupational Health and Safety
- 3 이경용(21-30).pdf530.5KB
Reference
1.산업안전보건연구원. 2009년 산업안전보건동향조사, 20109.12.
2.Baird D(2005), "The implementation of a health and safety management system and its interaction with organisational/safety culture: an industrial case study", Policy and practice in health and safety, Issue 1, pp.17-39
3.Clare G, Elsa U, Malcolm R(2003), "Occupational safety and health management system in Australia: barriers to success", Policy and Practice in Health and Safety, Issue 2, pp.67-81
4.Gray WB, Jones CA(1990), "Are OSHA health inspections effective? A longitudinal study in the manufacturing sector", Review of Economics and Statistics, Vol. 73, No. 3, pp.504-508
5.Gray WB, Jones CA(1991), "Longitudinal patter ns of compliance with occupational safety and health administration health and safety regulations in the manufacturing sector", The Journal of Haman Resources, Vol. 26, No. 4, pp.623-653
6.Gray WB, Scholz JT(1991), "Analyzing the Equ ity and efficiency of OSHA enforcement", Law & Policy, 13, pp.185-214.
7.Hudson P(2001), "Safety management and safety culture the long, hard and winding road", Proceedings of the first National Conference on Occupational Health and Safety Management Systems.
8.Rhee KY, Kim K, Yoon Y(2013), "Analysis of the relationship between regulation compliance and occupational injuries", Journal of Korea Safety Management & Science, Vol. 15, No. 2, pp.9-20
9.Kogi K(2002), "Work improvement and occupati onal safety and health management systems: common features and research needs", Industrial Health, 40, pp.121-133 
10.Mori KT(2002), "The introduction of an occupatio nal health management system for solving issues in occupational health activities in Japan", Indust rial Helath, 40, pp.167-174
11.Park K, Rhee KY(2011), "Mediating effect of OS H management activities on preventive invest ment in Korean manufacturing enterprises", Proc eedings of the Asian-Pacific Symposium on Safety.
12.Quinlan M(1999), "The implications of labour m arket restructuring in industrialized societies for occupational health and safety", Economic and Industrial Democracy, Vol. 20, No. 3, pp.427-460
13.Robinson AM(2006), " The contemporary british workplace: a safer and healthier place?", Work Employment & Society, Vol. 20, No. 1, pp.87-107
14.Robinson JC(1995), "The impact of environment al and occupational health regulation on produc tivity growth in U.S. Manufacturing", 12 Yale Journal on Regulation, 387.
15.Robson LS, et al(2007), "The effectiveness of OHSMS interventions", Safety Science 45:329-353.
16.Saksvik P, Quinlan M(2003), "Regulating syste matic occupational health and safety manage ment: Comparing the Norwegian and Australian experience", Industrial Relations 58(1):33-59.
17.Scholz JT, Gray WB(1990), "OSHA enforcement and workplace injuries: A behavioral approach to risk assessment", Journal of Risk and Uncert ainty, Vol. 3, Issue 3, pp. 283-305
18.Viscusi WK(1986), "The impact of occupational safety and health regulation, 1973-1983", The RAND Journal of Economics, Vol. 17, No. 4, pp.567-5
19.Weil D(1996), "If OSHA is so bad, why is compliance so good?", RAND Journal of Economics, Vol. 27, No. 3, pp.618-640
2.Baird D(2005), "The implementation of a health and safety management system and its interaction with organisational/safety culture: an industrial case study", Policy and practice in health and safety, Issue 1, pp.17-39
3.Clare G, Elsa U, Malcolm R(2003), "Occupational safety and health management system in Australia: barriers to success", Policy and Practice in Health and Safety, Issue 2, pp.67-81
4.Gray WB, Jones CA(1990), "Are OSHA health inspections effective? A longitudinal study in the manufacturing sector", Review of Economics and Statistics, Vol. 73, No. 3, pp.504-508
5.Gray WB, Jones CA(1991), "Longitudinal patter ns of compliance with occupational safety and health administration health and safety regulations in the manufacturing sector", The Journal of Haman Resources, Vol. 26, No. 4, pp.623-653
6.Gray WB, Scholz JT(1991), "Analyzing the Equ ity and efficiency of OSHA enforcement", Law & Policy, 13, pp.185-214.
7.Hudson P(2001), "Safety management and safety culture the long, hard and winding road", Proceedings of the first National Conference on Occupational Health and Safety Management Systems.
8.Rhee KY, Kim K, Yoon Y(2013), "Analysis of the relationship between regulation compliance and occupational injuries", Journal of Korea Safety Management & Science, Vol. 15, No. 2, pp.9-20
9.Kogi K(2002), "Work improvement and occupati onal safety and health management systems: common features and research needs", Industrial Health, 40, pp.121-133
10.Mori KT(2002), "The introduction of an occupatio nal health management system for solving issues in occupational health activities in Japan", Indust rial Helath, 40, pp.167-174
11.Park K, Rhee KY(2011), "Mediating effect of OS H management activities on preventive invest ment in Korean manufacturing enterprises", Proc eedings of the Asian-Pacific Symposium on Safety.
12.Quinlan M(1999), "The implications of labour m arket restructuring in industrialized societies for occupational health and safety", Economic and Industrial Democracy, Vol. 20, No. 3, pp.427-460
13.Robinson AM(2006), " The contemporary british workplace: a safer and healthier place?", Work Employment & Society, Vol. 20, No. 1, pp.87-107
14.Robinson JC(1995), "The impact of environment al and occupational health regulation on produc tivity growth in U.S. Manufacturing", 12 Yale Journal on Regulation, 387.
15.Robson LS, et al(2007), "The effectiveness of OHSMS interventions", Safety Science 45:329-353.
16.Saksvik P, Quinlan M(2003), "Regulating syste matic occupational health and safety manage ment: Comparing the Norwegian and Australian experience", Industrial Relations 58(1):33-59.
17.Scholz JT, Gray WB(1990), "OSHA enforcement and workplace injuries: A behavioral approach to risk assessment", Journal of Risk and Uncert ainty, Vol. 3, Issue 3, pp. 283-305
18.Viscusi WK(1986), "The impact of occupational safety and health regulation, 1973-1983", The RAND Journal of Economics, Vol. 17, No. 4, pp.567-5
19.Weil D(1996), "If OSHA is so bad, why is compliance so good?", RAND Journal of Economics, Vol. 27, No. 3, pp.618-640
-
-
Online Submission
http://submission.koreasafety.or.kr
-
KSSM
The Korean Society of Safety ManagementWaste Society
-
Editorial Office
Contact Information- Tel: +82.31.336.2844
- Fax: +82.31.336.2845
- E-mail: safety@mju.ac.kr -
-
-
-
-
-
-
